Well out from downtown, in Montgomery County, a house in Cut and Shoot with a detached garage or a carport puts a longer walk between the truck and the kitchen door.
Choosing between the stones
The first choice is natural or engineered. Granite, quartzite and marble are cut from the earth, so every slab is different and you pick the actual slab we cut. Quartz and porcelain are made to a pattern, so a sample shows you what the whole slab looks like. After that, the choice comes down to heat, care and look.
Granite is the working stone. It takes normal pan heat and resists scratches, and it needs a penetrating sealer. Quartzite looks closer to marble and is harder than granite, with the same need for sealer. Quartz asks for no sealer at all and stays clean with soap and water, but it wants a trivet under a hot pot, and it never goes outside, because sunlight yellows its resin.
Marble etches from acids and scratches more easily than the others, and it needs resealing over the years. People who choose it for a kitchen choose the patina too. Porcelain is thin, often 12 mm, and it resists heat, sun and stains. Its printed face can stop at the edge, so a mitered edge is the common fix, and it needs a solid, level base underneath.
Picking the slab
Natural stone is picked in person, at any stone yard. Stand back first to see how the pattern moves across the whole slab, then look close at the area where the sink will go. Bring a cabinet door or a photo of the floor, since yard lighting flattens color. Yards sell granite by level, and the level reflects rarity and yield, not strength. Quartz and porcelain are chosen from samples, and every slab of a pattern matches its sample. Whatever you choose, we lay the template out on that slab so the strongest part of the pattern lands where you look most.
Caring for the stone
Daily care is warm water and a mild soap. Skip bleach, vinegar and harsh solvents, which wear on sealer and dull quartz resin. Wipe oil, wine and coffee before they sit. To test the sealer on granite or quartzite, put a few drops of water on the stone: if it darkens, it is time to reseal. Lighter granites want sealer about once a year, dense dark stones less often. Marble etches from acids, so wipe lemon and wine quickly. Hard tap water leaves spots on dark polished stone, and a dry cloth after the dishes keeps them away.
How a job runs
Every job runs through the same steps with the same crew. It starts with a free estimate at the house. We look at the cabinets, the sink and the cooktop, bring samples of all five materials and give you a written price, with tear-out and the sink install as their own lines. Then you choose the stone. Granite, quartzite and marble are picked slab by slab at any stone yard: you send us a photo of the slab tag, and the slab is confirmed at template. Quartz and porcelain are picked from samples.
Once the cabinets are set and level, our templater comes back and records every wall, run and cutout with a digital template. Someone should be home for that visit, since seams and overhangs get settled on the spot. In our shop, we cut the slab to that template, polish the edges and cut the sink and cooktop openings.
On install day, the crew takes out the old tops and hauls them away, sets the new stone, fills the seams with color-matched epoxy, sets the sink and drills the faucet holes. Granite, quartzite and marble get their sealer before the crew leaves.
Planning the template visit
The drive to a house well outside Houston takes time, so it helps to have everything the template depends on ready before that visit: the cabinets set and level and the counters cleared. The install brings the finished tops, the epoxy and the sealer on the same truck.
Where we work and how to start
The crew that serves Cut and Shoot also works in Conroe, Willis and Shenandoah, and across the rest of Montgomery County.
The first step for a kitchen in Cut and Shoot is the free estimate. Use the form below or call us, and include photos of the room if you can.