Houston, TX  Countertop fabrication and installation Serving Greater Houston|Log in
Get a Free Estimate
Serving homeowners and builders in the Energy Corridor, Houston

Countertops in the Energy Corridor, Houston

The Energy Corridor is an established neighborhood of Houston in Harris County, and we template, cut and install stone countertops there with our own crew. The estimate is free and happens in your kitchen.

← Every area we serve
Countertop photo. Recommended 1600x900.

Past the close-in suburbs, in Harris County, the sink in a kitchen in the Energy Corridor may have moved in a past remodel, and the plumbing under it shows where the new cutout lands.

Choosing between the stones

The first choice is natural or engineered. Granite, quartzite and marble are cut from the earth, so every slab is different and you pick the actual slab we cut. Quartz and porcelain are made to a pattern, so a sample shows you what the whole slab looks like. After that, the choice comes down to heat, care and look.

Granite is the working stone. It takes normal pan heat and resists scratches, and it needs a penetrating sealer. Quartzite looks closer to marble and is harder than granite, with the same need for sealer. Quartz asks for no sealer at all and stays clean with soap and water, but it wants a trivet under a hot pot, and it never goes outside, because sunlight yellows its resin.

Marble etches from acids and scratches more easily than the others, and it needs resealing over the years. People who choose it for a kitchen choose the patina too. Porcelain is thin, often 12 mm, and it resists heat, sun and stains. Its printed face can stop at the edge, so a mitered edge is the common fix, and it needs a solid, level base underneath.

Vanities, fireplaces and backsplash

Stone goes well beyond the kitchen. Vanity tops can run in 2 cm stone, and when the sizes work, a small vanity can come out of the kitchen slab. A fireplace surround can match the kitchen or contrast with it, and marble is a classic there, since a surround sees little wear. Backsplash can stop a few inches above the counter or run full height to the upper cabinets, and a full-height splash cut from the counter slab carries the pattern up the wall. Each of these starts with the same free estimate as a kitchen.

How a job runs

Every job runs through the same steps with the same crew. It starts with a free estimate at the house. We look at the cabinets, the sink and the cooktop, bring samples of all five materials and give you a written price, with tear-out and the sink install as their own lines. Then you choose the stone. Granite, quartzite and marble are picked slab by slab at any stone yard: you send us a photo of the slab tag, and the slab is confirmed at template. Quartz and porcelain are picked from samples.

Once the cabinets are set and level, our templater comes back and records every wall, run and cutout with a digital template. Someone should be home for that visit, since seams and overhangs get settled on the spot. In our shop, we cut the slab to that template, polish the edges and cut the sink and cooktop openings.

On install day, the crew takes out the old tops and hauls them away, sets the new stone, fills the seams with color-matched epoxy, sets the sink and drills the faucet holes. Granite, quartzite and marble get their sealer before the crew leaves.

Older houses and older cabinets

In an older house, the cabinets under the old top may no longer be level, and the walls may not be square. We check every run with a level before the template, and the digital template records the walls as they are, so the stone is cut to the room and not to a drawing. A cabinet that needs shimming or a repair should be fixed before template day, since fixing it first saves a recut.

Before template day

A few decisions make template day go smoothly. The cabinets should be set, fastened and level. The sink model should be chosen and the cooktop or range model known, since their openings are cut in our shop from the template. Pick the faucet too, because it sets how many faucet holes the top needs. Decide on the overhang for any seating and on the backsplash height. Clear the counters and the sink base so the templater can reach every wall, and plan for someone to be home. A change after the template can mean a second template, so the layout is settled on the spot.

Where we work and how to start

Other places near the Energy Corridor on our list: Westchase, Bunker Hill and Memorial.

The first step for a kitchen in the Energy Corridor is the free estimate. Use the form below or call us, and include photos of the room if you can.

Frequently asked questions

We are updating an older kitchen in the Energy Corridor. What needs to change?
It may be only the countertop. New stone, a new edge profile and a new sink can change the look of a kitchen without touching the cabinets, as long as the boxes are sound. An older layout can carry a cooktop or a sink size that is hard to find now, and the estimate is the place to decide whether to keep them or plan new openings.
Can you replace the countertops in the Energy Corridor without replacing the cabinets?
Yes, when the cabinets are sound. The old top comes off at the install, the new stone goes on the same boxes, and the cabinet faces stay as they are. If you plan to repaint the cabinets, the order is up to you: paint can go first or wait until after the install, since the stone does not mind either way.
Do you serve the Energy Corridor?
Yes. Every address there gets the same free in-home estimate, the same stone and the same crew as anywhere else we work. If you are unsure whether your street counts, include the address in the estimate form. The Areas page lists every place we serve, grouped by county, so a house near the edge of a town can check there too.
What should I have ready for the estimate visit in the Energy Corridor?
A clear idea of the rooms and a rough sense of the look you want is enough. If you have them, bring the names of stones you like, the sink and faucet you have in mind and any drawings from a designer or remodeler. Rough measurements help but are not required. The estimate is free, and there is no obligation to go ahead.
Free in-home estimate
Digital template, in-house fabrication
Our own install crews
Greater Houston, 70 miles around

Get a free estimate

Get a Free Estimate