A short drive from downtown, in Harris County, a house in Hunters Creek with an attached garage can give the finished tops a covered way in, out of the rain.
Choosing between the stones
The first choice is natural or engineered. Granite, quartzite and marble are cut from the earth, so every slab is different and you pick the actual slab we cut. Quartz and porcelain are made to a pattern, so a sample shows you what the whole slab looks like. After that, the choice comes down to heat, care and look.
Granite is the working stone. It takes normal pan heat and resists scratches, and it needs a penetrating sealer. Quartzite looks closer to marble and is harder than granite, with the same need for sealer. Quartz asks for no sealer at all and stays clean with soap and water, but it wants a trivet under a hot pot, and it never goes outside, because sunlight yellows its resin.
Marble etches from acids and scratches more easily than the others, and it needs resealing over the years. People who choose it for a kitchen choose the patina too. Porcelain is thin, often 12 mm, and it resists heat, sun and stains. Its printed face can stop at the edge, so a mitered edge is the common fix, and it needs a solid, level base underneath.
Edges and thickness
We cut ten edge profiles in our shop. Eased and beveled edges keep a clean, square line. Half bullnose and full bullnose round the front for a softer feel. Ogee and dupont add a curved, more formal shape. A chiseled edge looks rough on purpose, and a cove edge curves under the top. Mitered and laminated edges add a second strip of stone at the front, so the top reads thicker than the slab. For thickness, 3 cm is the standard for kitchens, and 2 cm is used for vanities or under a laminated edge. On 3 cm stone, an overhang deeper than 10 inches needs support brackets.
Sinks and cutouts
Undermount, drop-in, farmhouse and vessel sinks all work with stone, and each one shapes the cutout. An undermount sink hangs below the counter, so the cut edge is polished and stays in view. A drop-in sink rests on top, and its rim covers the cut. A farmhouse sink needs its own base cabinet and a cutout sized to its front. A vessel sink sits on the counter and needs a drain hole and a faucet hole. An integrated sink is shaped from the same material as the top, and we talk that option through at the estimate. The sink and cooktop openings are cut in our shop from the template.
From estimate to install
You will see us three times. The first visit is the free estimate. We measure enough to price the job, check the cabinets for level, look at the sink and the cooktop and bring samples, so you can see each stone in your own light. The written price lists the stone, the edges, the cutouts, tear-out and the sink install line by line.
The second visit is the template. It happens once the cabinets are set and level. Our templater records the room digitally, which catches walls that are out of square, and settles the seam placement and the overhangs with you. Nothing is cut before that. In our shop, the slab is then cut to the template, with the sink and cooktop openings cut and the edges polished.
The third visit is the install. The crew removes the old tops and takes them away, sets the stone on the cabinets, fills the seams with epoxy tinted to the stone and sets the sink. Faucet holes are drilled on site at install, where the faucet will sit. Natural stone gets sealer, and the crew cleans up before it leaves.
Older houses and older cabinets
In an older house, the cabinets under the old top may no longer be level, and the walls may not be square. We check every run with a level before the template, and the digital template records the walls as they are, so the stone is cut to the room and not to a drawing. A cabinet that needs shimming or a repair should be fixed before template day, since fixing it first saves a recut.
Where we work and how to start
Beyond Hunters Creek, our crew works across the rest of Harris County, including Hedwig Village, Bunker Hill, Memorial and Piney Point.
The first step for a kitchen in Hunters Creek is the free estimate. Use the form below or call us, and include photos of the room if you can.