Houston, TX  Countertop fabrication and installation Serving Greater Houston|Log in
Get a Free Estimate
Serving homeowners and builders in New Caney, TX

Countertops in New Caney, TX

New Caney is an established suburb in Montgomery County, and we template, cut and install stone countertops there with our own crew. The estimate is free and happens in your kitchen.

← Every area we serve
Countertop photo. Recommended 1600x900.

Well out from downtown, in Montgomery County, a kitchen in New Caney may have a short tile splash from an earlier update, and taking it down leaves a strip of wall to finish.

Choosing between the stones

The first choice is natural or engineered. Granite, quartzite and marble are cut from the earth, so every slab is different and you pick the actual slab we cut. Quartz and porcelain are made to a pattern, so a sample shows you what the whole slab looks like. After that, the choice comes down to heat, care and look.

Granite is the working stone. It takes normal pan heat and resists scratches, and it needs a penetrating sealer. Quartzite looks closer to marble and is harder than granite, with the same need for sealer. Quartz asks for no sealer at all and stays clean with soap and water, but it wants a trivet under a hot pot, and it never goes outside, because sunlight yellows its resin.

Marble etches from acids and scratches more easily than the others, and it needs resealing over the years. People who choose it for a kitchen choose the patina too. Porcelain is thin, often 12 mm, and it resists heat, sun and stains. Its printed face can stop at the edge, so a mitered edge is the common fix, and it needs a solid, level base underneath.

Edges and thickness

We cut ten edge profiles in our shop. Eased and beveled edges keep a clean, square line. Half bullnose and full bullnose round the front for a softer feel. Ogee and dupont add a curved, more formal shape. A chiseled edge looks rough on purpose, and a cove edge curves under the top. Mitered and laminated edges add a second strip of stone at the front, so the top reads thicker than the slab. For thickness, 3 cm is the standard for kitchens, and 2 cm is used for vanities or under a laminated edge. On 3 cm stone, an overhang deeper than 10 inches needs support brackets.

How a job runs

Every job runs through the same steps with the same crew. It starts with a free estimate at the house. We look at the cabinets, the sink and the cooktop, bring samples of all five materials and give you a written price, with tear-out and the sink install as their own lines. Then you choose the stone. Granite, quartzite and marble are picked slab by slab at any stone yard: you send us a photo of the slab tag, and the slab is confirmed at template. Quartz and porcelain are picked from samples.

Once the cabinets are set and level, our templater comes back and records every wall, run and cutout with a digital template. Someone should be home for that visit, since seams and overhangs get settled on the spot. In our shop, we cut the slab to that template, polish the edges and cut the sink and cooktop openings.

On install day, the crew takes out the old tops and hauls them away, sets the new stone, fills the seams with color-matched epoxy, sets the sink and drills the faucet holes. Granite, quartzite and marble get their sealer before the crew leaves.

Older houses and older cabinets

In an older house, the cabinets under the old top may no longer be level, and the walls may not be square. We check every run with a level before the template, and the digital template records the walls as they are, so the stone is cut to the room and not to a drawing. A cabinet that needs shimming or a repair should be fixed before template day, since fixing it first saves a recut.

Before template day

A few decisions make template day go smoothly. The cabinets should be set, fastened and level. The sink model should be chosen and the cooktop or range model known, since their openings are cut in our shop from the template. Pick the faucet too, because it sets how many faucet holes the top needs. Decide on the overhang for any seating and on the backsplash height. Clear the counters and the sink base so the templater can reach every wall, and plan for someone to be home. A change after the template can mean a second template, so the layout is settled on the spot.

Where we work and how to start

Beyond New Caney, our crew works across the rest of Greater Houston, including Porter, Splendora and Kingwood.

The first step for a kitchen in New Caney is the free estimate. Use the form below or call us, and include photos of the room if you can.

Frequently asked questions

Can you replace the countertops in New Caney without replacing the cabinets?
Yes, when the cabinets are sound. The old top comes off at the install, the new stone goes on the same boxes, and the cabinet faces stay as they are. If you plan to repaint the cabinets, the order is up to you: paint can go first or wait until after the install, since the stone does not mind either way.
We are updating an older kitchen in New Caney. What needs to change?
It may be only the countertop. New stone, a new edge profile and a new sink can change the look of a kitchen without touching the cabinets, as long as the boxes are sound. An older layout can carry a cooktop or a sink size that is hard to find now, and the estimate is the place to decide whether to keep them or plan new openings.
How soon can you get to a house in New Caney?
It depends on the calendar at the time you ask. The quickest way to find out is to send the estimate form with your address and the rooms you have in mind, since the estimate visit is the first step. After that, the pace depends as much on the house as on the calendar: the template waits for the cabinets to be set and the stone to be chosen.
Do homes in New Caney get the full range of materials?
Yes. There is no smaller selection by location: granite, quartz, quartzite, marble and porcelain are all on the table, in the same edge profiles and thicknesses. What changes from one house to the next is the kitchen, not the list. The estimate is where the choices get narrowed down to the ones that suit your room and the way you cook.
Free in-home estimate
Digital template, in-house fabrication
Our own install crews
Greater Houston, 70 miles around

Get a free estimate

Get a Free Estimate