The master-planned subdivisions of Pearland went up in the 1990s and 2000s, Shadow Creek Ranch, Southern Trails, Silverlake and Sunrise Lakes among them. A house from that stretch may be on its first countertop, set on builder cabinets that can take a stone top when they sit level.
Choosing between the stones
The first choice is natural or engineered. Granite, quartzite and marble are cut from the earth, so every slab is different and you pick the actual slab we cut. Quartz and porcelain are made to a pattern, so a sample shows you what the whole slab looks like. After that, the choice comes down to heat, care and look.
Granite is the working stone. It takes normal pan heat and resists scratches, and it needs a penetrating sealer. Quartzite looks closer to marble and is harder than granite, with the same need for sealer. Quartz asks for no sealer at all and stays clean with soap and water, but it wants a trivet under a hot pot, and it never goes outside, because sunlight yellows its resin.
Marble etches from acids and scratches more easily than the others, and it needs resealing over the years. People who choose it for a kitchen choose the patina too. Porcelain is thin, often 12 mm, and it resists heat, sun and stains. Its printed face can stop at the edge, so a mitered edge is the common fix, and it needs a solid, level base underneath.
Sinks and cutouts
Undermount, drop-in, farmhouse and vessel sinks all work with stone, and each one shapes the cutout. An undermount sink hangs below the counter, so the cut edge is polished and stays in view. A drop-in sink rests on top, and its rim covers the cut. A farmhouse sink needs its own base cabinet and a cutout sized to its front. A vessel sink sits on the counter and needs a drain hole and a faucet hole. An integrated sink is shaped from the same material as the top, and we talk that option through at the estimate. The sink and cooktop openings are cut in our shop from the template.
Seams and overhangs
A long run or a large island can need more than one piece of stone. Where the layout allows, the seam goes at the sink or the cooktop, where a cutout already breaks the surface. We cut the joint tight in our shop and fill it on site with epoxy tinted to the stone. A seam is visible if you look closely, and a busy pattern hides it better than a quiet one. You see the seam plan at template, before anything is cut. Seating at an island needs knee room, and on 3 cm stone any overhang deeper than 10 inches gets support brackets.
From estimate to install
You will see us three times. The first visit is the free estimate. We measure enough to price the job, check the cabinets for level, look at the sink and the cooktop and bring samples, so you can see each stone in your own light. The written price lists the stone, the edges, the cutouts, tear-out and the sink install line by line.
The second visit is the template. It happens once the cabinets are set and level. Our templater records the room digitally, which catches walls that are out of square, and settles the seam placement and the overhangs with you. Nothing is cut before that. In our shop, the slab is then cut to the template, with the sink and cooktop openings cut and the edges polished.
The third visit is the install. The crew removes the old tops and takes them away, sets the stone on the cabinets, fills the seams with epoxy tinted to the stone and sets the sink. Faucet holes are drilled on site at install, where the faucet will sit. Natural stone gets sealer, and the crew cleans up before it leaves.
Replacing a builder-grade top
A house in a newer subdivision may still have the countertop the builder put in. Replacing it with stone is a straightforward job when the cabinets are staying: the old top comes off on install day, and the new stone is cut to a digital template of the existing boxes. Builder cabinets can still be out of level, so we check each run before we template.
Where we work and how to start
The crew that serves Pearland also works in Friendswood, South Houston and Manvel, and across the rest of Greater Houston.
If you are planning new countertops in Pearland, send the estimate form or give us a call. We bring the samples, and you bring the questions.