Far from downtown Houston, in Brazoria County, a country kitchen in West Columbia with a long run of counter can need a seam where one slab ends.
Choosing between the stones
The first choice is natural or engineered. Granite, quartzite and marble are cut from the earth, so every slab is different and you pick the actual slab we cut. Quartz and porcelain are made to a pattern, so a sample shows you what the whole slab looks like. After that, the choice comes down to heat, care and look.
Granite is the working stone. It takes normal pan heat and resists scratches, and it needs a penetrating sealer. Quartzite looks closer to marble and is harder than granite, with the same need for sealer. Quartz asks for no sealer at all and stays clean with soap and water, but it wants a trivet under a hot pot, and it never goes outside, because sunlight yellows its resin.
Marble etches from acids and scratches more easily than the others, and it needs resealing over the years. People who choose it for a kitchen choose the patina too. Porcelain is thin, often 12 mm, and it resists heat, sun and stains. Its printed face can stop at the edge, so a mitered edge is the common fix, and it needs a solid, level base underneath.
From estimate to install
You will see us three times. The first visit is the free estimate. We measure enough to price the job, check the cabinets for level, look at the sink and the cooktop and bring samples, so you can see each stone in your own light. The written price lists the stone, the edges, the cutouts, tear-out and the sink install line by line.
The second visit is the template. It happens once the cabinets are set and level. Our templater records the room digitally, which catches walls that are out of square, and settles the seam placement and the overhangs with you. Nothing is cut before that. In our shop, the slab is then cut to the template, with the sink and cooktop openings cut and the edges polished.
The third visit is the install. The crew removes the old tops and takes them away, sets the stone on the cabinets, fills the seams with epoxy tinted to the stone and sets the sink. Faucet holes are drilled on site at install, where the faucet will sit. Natural stone gets sealer, and the crew cleans up before it leaves.
Planning the template visit
The drive to a house well outside Houston takes time, so it helps to have everything the template depends on ready before that visit: the cabinets set and level and the counters cleared. The install brings the finished tops, the epoxy and the sealer on the same truck.
Tear-out and haul-away
If old tops are coming off, that happens at the start of the install visit, right before the new stone goes in, and an early tear-out is available on request. The sink and the faucet are disconnected first. The crew then lifts off the old laminate, tile or stone, protects the cabinets and the floor as it works, and hauls the old material away on our truck. Tear-out is its own line on the estimate, so you can see what it costs.
Builders, remodelers and commercial work
We also work for builders, remodelers, designers and property managers. Builders and remodelers give us the cabinet date, and we template once the boxes are set, then schedule the install around the other trades. Designers can send drawings with the estimate request, and we check them against the real walls at template. Restaurants, bars, offices and hotels get commercial counters cut in the same shop and set by the same crew. Apartment owners doing unit turns can repeat one material and one edge profile across every unit.
Where we work and how to start
Beyond West Columbia, our crew works across the rest of Brazoria County, including Sweeny, Brazoria and Angleton.
If you are planning new countertops in West Columbia, send the estimate form or give us a call. We bring the samples, and you bring the questions.