Houston, TX  Countertop fabrication and installation Serving Greater Houston|Log in
Get a Free Estimate
Serving homeowners and builders in Cypress, TX

Quartz Countertops in Cypress, TX

From the free estimate to the install, our own crew handles quartz countertops in Cypress.

← All countertops for this area
Countertop photo. Recommended 1600x900.

Bridgeland, Towne Lake, Cypress Creek Lakes and Fairfield are master-planned communities in Cypress, in Harris County. Towne Lake is built around a lake, and a house on the water there may have a back patio in full sun where an outdoor counter is planned with the kitchen.

What quartz is and how it performs

Quartz is an engineered surface: about 90 percent ground quartz bound with polymer resin and pigment. It is non-porous, so it never needs sealing, and coffee and wine wipe off. Its pattern holds from slab to slab, which helps on a long island or where the kitchen stone continues onto a vanity. The resin is its weak point. Sustained heat above about 300 F can mark it, so a hot pot belongs on a trivet, and harsh solvents dull it.

Colors and looks

Quartz comes in solid whites, grays and blacks, in fine-flecked patterns and in patterns made to mimic marble veining. Because the pattern is made, it repeats, and a sample shows what every slab of that pattern looks like. Whites differ more than people expect: some lean warm, some cool, some bright. Hold the sample next to your cabinets in daylight and again at night before you decide.

Choosing your quartz

Choosing quartz means choosing a pattern, not a slab. Look at the sample in your own kitchen light, next to the cabinets and the floor. Solids are calm and hide seams, veined patterns are bold and need seam planning, and some patterns carry a fine sparkle. For a long island, ask whether the pattern comes in a slab long enough for one piece.

Where quartz fits

Quartz belongs indoors: kitchens, vanities, laundry rooms, bars and office break rooms. It does not go outside. Direct sunlight yellows the resin over time on any patio, covered or open, so outdoor kitchens get granite, quartzite or porcelain instead. A fireplace surround in quartz needs care with heat, and we talk that through at the estimate. Kitchens use 3 cm quartz, and an overhang deeper than 10 inches needs support brackets.

Sinks and cutouts in quartz

Quartz takes undermount, drop-in, farmhouse and vessel sinks. An undermount sink shows the polished cut edge, which on quartz looks as clean as the top. The sink and cooktop openings are cut in our shop from the template. A farmhouse sink needs its own base cabinet and a cutout sized to its front.

Seams and edges in quartz

Because the pattern repeats, seams in quartz match more easily than in natural stone. Solid colors hide a seam well. A veined pattern needs planning so the veins meet as closely as the slab allows. We place seams at the sink or the cooktop where the layout allows, cut the joint tight and fill it with epoxy matched to the color. A seam is still visible up close. Eased and beveled edges suit the clean look of most quartz patterns, and a mitered edge makes a thin top read as a solid block.

How a quartz job runs

A quartz job starts with a free estimate at the house, where we check the cabinets, look at the sink and the cooktop and bring samples. Quartz is picked from samples, and every slab of the pattern matches its sample. Once the cabinets are set and level, our templater records the room with a digital template, and someone should be home to settle the seams and the overhangs. In our shop, we cut the quartz to that template, polish the edges and cut the sink and cooktop openings. On install day, the crew removes the old tops and hauls them away, sets the quartz, fills the seams and sets the sink, with the faucet holes drilled on site at install. The counter is ready to use once the seams have cured.

Where we work and how to start

The crew that sets quartz in Cypress also works in Hockley, Jersey Village and Tomball, and it cuts granite and quartzite as well.

If quartz feels right for your kitchen in Cypress, the next step is the free estimate. Use the form below or call us.

Frequently asked questions

Can you match countertops across several homes in one subdivision in Cypress?
Yes, by choosing the same material, color and edge profile for each house. Neighbors or a builder can settle the choice once and repeat it from house to house. Each house still gets its own template and install, since cabinet runs, appliances and sink positions differ even within one subdivision.
How do you measure a kitchen in a master-planned community like Cypress?
With a digital template of the actual cabinets, taken once they are set and level. A builder may offer the same plan with different options, such as an island, a longer run or a wider range, so two houses on one street can need different tops. The template records what is really there, including any options added after the house was built.
How soon can you get to a house in Cypress?
It depends on the calendar at the time you ask. The quickest way to find out is to send the estimate form with your address and the rooms you have in mind, since the estimate visit is the first step. After that, the pace depends as much on the house as on the calendar: the template waits for the cabinets to be set and the stone to be chosen.
What should I have ready for the estimate visit in Cypress?
A clear idea of the rooms and a rough sense of the look you want is enough. If you have them, bring the names of stones you like, the sink and faucet you have in mind and any drawings from a designer or remodeler. Rough measurements help but are not required. The estimate is free, and there is no obligation to go ahead.
Free in-home estimate
Digital template, in-house fabrication
Our own install crews
Greater Houston, 70 miles around

Get a free estimate

Get a Free Estimate