Kings Point, Elm Grove, Trailwood and Kingwood Lakes are villages within Kingwood, in Harris County. Kingwood Lakes is one of the later villages, and a kitchen there may be bigger and more open than one in the first villages, with a larger island to plan around.
What quartz is and how it performs
Quartz is an engineered surface: about 90 percent ground quartz bound with polymer resin and pigment. It is non-porous, so it never needs sealing, and coffee and wine wipe off. Its pattern holds from slab to slab, which helps on a long island or where the kitchen stone continues onto a vanity. The resin is its weak point. Sustained heat above about 300 F can mark it, so a hot pot belongs on a trivet, and harsh solvents dull it.
Quartz next to granite and quartzite
Next to granite, quartz wins on upkeep and gives up heat: granite handles normal pan heat, and quartz resin needs protecting from it. Next to quartzite, quartz costs less for most patterns and repeats its pattern exactly, while quartzite is real stone with veins that never repeat. Outdoors the choice is made for you, since quartz stays inside. We bring samples of all three to the estimate.
Choosing your quartz
Choosing quartz means choosing a pattern, not a slab. Look at the sample in your own kitchen light, next to the cabinets and the floor. Solids are calm and hide seams, veined patterns are bold and need seam planning, and some patterns carry a fine sparkle. For a long island, ask whether the pattern comes in a slab long enough for one piece.
Where quartz fits
Quartz belongs indoors: kitchens, vanities, laundry rooms, bars and office break rooms. It does not go outside. Direct sunlight yellows the resin over time on any patio, covered or open, so outdoor kitchens get granite, quartzite or porcelain instead. A fireplace surround in quartz needs care with heat, and we talk that through at the estimate. Kitchens use 3 cm quartz, and an overhang deeper than 10 inches needs support brackets.
Sinks and cutouts in quartz
Quartz takes undermount, drop-in, farmhouse and vessel sinks. An undermount sink shows the polished cut edge, which on quartz looks as clean as the top. The sink and cooktop openings are cut in our shop from the template. A farmhouse sink needs its own base cabinet and a cutout sized to its front.
Caring for quartz
Clean quartz with a damp cloth and a drop of mild soap. Skip bleach, oven cleaner and abrasive or high-pH cleaners, which dull the resin. A chipped edge on quartz can be repaired.
How a quartz job runs
A quartz job starts with a free estimate at the house, where we check the cabinets, look at the sink and the cooktop and bring samples. Quartz is picked from samples, and every slab of the pattern matches its sample. Once the cabinets are set and level, our templater records the room with a digital template, and someone should be home to settle the seams and the overhangs. In our shop, we cut the quartz to that template, polish the edges and cut the sink and cooktop openings. On install day, the crew removes the old tops and hauls them away, sets the quartz, fills the seams and sets the sink, with the faucet holes drilled on site at install. The counter is ready to use once the seams have cured.
Where we work and how to start
The crew that sets quartz in Kingwood also works in Atascocita, Porter and Humble, and it cuts granite and quartzite as well.
Ready to price quartz for a house in Kingwood? Send the estimate form with a few photos, or call, and we will set a time to visit.