Deer Park has 1960s and 1970s ranch homes, with newer subdivisions on its north and west edges, and its neighborhoods include Bayou Bend, Bentwood, Beverly Terrace, Canterbury Place and Asbury Gardens. A 1960s ranch kitchen may have a peninsula that divides it from the den, and a peninsula top is its own piece with an exposed end to finish.
The five stones we cut
We cut and install five materials, and each one fits a different kind of kitchen. Granite is natural stone, quarried mostly in Brazil and India. It handles normal pan heat and resists scratching well, and it needs a penetrating sealer. Quartz is engineered: about 90 percent ground quartz bound with resin and pigment. It never needs sealing, and its pattern holds from one slab to the next. The resin is its weak point, since sustained heat above about 300 F, harsh solvents and direct sun all damage it, so quartz stays indoors.
Quartzite is natural stone too, quartz sandstone fused by heat and pressure. It is harder than granite, carries veining that reads like marble and needs sealing. A few stones sold as quartzite are really dolomitic marble and etch like marble, so it pays to know which kind a slab is before you buy it. Marble is the soft one. Lemon, vinegar and wine etch it, it scratches and it wears a patina over time, which is why people choose it for a vanity, a fireplace surround or a baking station, and for a kitchen when they like the patina. Porcelain comes in large, thin slabs with the pattern printed on the face. It resists heat, sun and stains, which makes it a strong choice outdoors, though a chip in porcelain is hard to repair.
From estimate to install
You will see us three times. The first visit is the free estimate. We measure enough to price the job, check the cabinets for level, look at the sink and the cooktop and bring samples, so you can see each stone in your own light. The written price lists the stone, the edges, the cutouts, tear-out and the sink install line by line.
The second visit is the template. It happens once the cabinets are set and level. Our templater records the room digitally, which catches walls that are out of square, and settles the seam placement and the overhangs with you. Nothing is cut before that. In our shop, the slab is then cut to the template, with the sink and cooktop openings cut and the edges polished.
The third visit is the install. The crew removes the old tops and takes them away, sets the stone on the cabinets, fills the seams with epoxy tinted to the stone and sets the sink. Faucet holes are drilled on site at install, where the faucet will sit. Natural stone gets sealer, and the crew cleans up before it leaves.
Older houses and older cabinets
In an older house, the cabinets under the old top may no longer be level, and the walls may not be square. We check every run with a level before the template, and the digital template records the walls as they are, so the stone is cut to the room and not to a drawing. A cabinet that needs shimming or a repair should be fixed before template day, since fixing it first saves a recut.
Countertop repair
Not every worn top has to come out. We fill chips at edges and sink rims, rework seams that have opened, re-polish dull spots and re-seal stone whose sealer has worn thin. A loose undermount sink can be re-attached. Some damage cannot be made to disappear, and a chip in porcelain is hard to repair. The quickest way to begin is to describe the damage in the estimate form.
Before template day
A few decisions make template day go smoothly. The cabinets should be set, fastened and level. The sink model should be chosen and the cooktop or range model known, since their openings are cut in our shop from the template. Pick the faucet too, because it sets how many faucet holes the top needs. Decide on the overhang for any seating and on the backsplash height. Clear the counters and the sink base so the templater can reach every wall, and plan for someone to be home. A change after the template can mean a second template, so the layout is settled on the spot.
Where we work and how to start
Other places near Deer Park on our list: Pasadena, Channelview and La Porte.
If you are planning new countertops in Deer Park, send the estimate form or give us a call. We bring the samples, and you bring the questions.