Houston, TX  Countertop fabrication and installation Serving Greater Houston|Log in
Get a Free Estimate
Serving homeowners and builders in Katy, TX

Countertops in Katy, TX

We template, cut and install stone countertops in Katy, a city spanning Harris, Fort Bend and Waller counties at the center of Greater Katy, 30 to 45 minutes from downtown Houston. One crew handles the job from the free in-home estimate to the final seam.

← Every area we serve
Countertop photo. Recommended 1600x900.

Greater Katy grew around an older town center, with master-planned communities from the 1990s on, among them Grand Lakes, Seven Meadows, Firethorne and Grayson Lakes. A kitchen from those years may have a large island, and its size decides whether the island top comes from one slab or two.

The five stones we cut

We cut and install five materials, and each one fits a different kind of kitchen. Granite is natural stone, quarried mostly in Brazil and India. It handles normal pan heat and resists scratching well, and it needs a penetrating sealer. Quartz is engineered: about 90 percent ground quartz bound with resin and pigment. It never needs sealing, and its pattern holds from one slab to the next. The resin is its weak point, since sustained heat above about 300 F, harsh solvents and direct sun all damage it, so quartz stays indoors.

Quartzite is natural stone too, quartz sandstone fused by heat and pressure. It is harder than granite, carries veining that reads like marble and needs sealing. A few stones sold as quartzite are really dolomitic marble and etch like marble, so it pays to know which kind a slab is before you buy it. Marble is the soft one. Lemon, vinegar and wine etch it, it scratches and it wears a patina over time, which is why people choose it for a vanity, a fireplace surround or a baking station, and for a kitchen when they like the patina. Porcelain comes in large, thin slabs with the pattern printed on the face. It resists heat, sun and stains, which makes it a strong choice outdoors, though a chip in porcelain is hard to repair.

Picking the slab

Natural stone is picked in person, at any stone yard, and you send us a photo of the slab tag so the slab can be confirmed at template. Stand back first to see how the pattern moves across the whole slab, then look close at the area where the sink will go. Bring a cabinet door or a photo of the floor, since yard lighting flattens color. Yards sell granite by level, and the level reflects rarity and yield, not strength. Quartz and porcelain are chosen from samples, and every slab of a pattern matches its sample. Whatever you choose, we lay the template out on that slab so the strongest part of the pattern lands where you look most.

Vanities, fireplaces and backsplash

Stone goes well beyond the kitchen. Vanity tops can run in 2 cm stone, and when the sizes work, a small vanity can come out of the kitchen slab. A fireplace surround can match the kitchen or contrast with it, and marble is a classic there, since a surround sees little wear. Backsplash can stop a few inches above the counter or run full height to the upper cabinets, and a full-height splash cut from the counter slab carries the pattern up the wall. Each of these starts with the same free estimate as a kitchen.

From estimate to install

You will see us three times. The first visit is the free estimate. We measure enough to price the job, check the cabinets for level, look at the sink and the cooktop and bring samples, so you can see each stone in your own light. The written price lists the stone, the edges, the cutouts, tear-out and the sink install line by line.

The second visit is the template. It happens once the cabinets are set and level. Our templater records the room digitally, which catches walls that are out of square, and settles the seam placement and the overhangs with you. Nothing is cut before that. In our shop, the slab is then cut to the template, with the sink and cooktop openings cut and the edges polished.

The third visit is the install. The crew removes the old tops and takes them away, sets the stone on the cabinets, fills the seams with epoxy tinted to the stone and sets the sink. Faucet holes are drilled on site at install, where the faucet will sit. Natural stone gets sealer, and the crew cleans up before it leaves.

Replacing a builder-grade top

A house in a newer subdivision may still have the countertop the builder put in. Replacing it with stone is a straightforward job when the cabinets are staying: the old top comes off on install day, and the new stone is cut to a digital template of the existing boxes. Builder cabinets can still be out of level, so we check each run before we template.

Where we work and how to start

Other places near Katy on our list: Cinco Ranch, Brookshire and Fulshear.

The first step for a kitchen in Katy is the free estimate. Use the form below or call us, and include photos of the room if you can.

Frequently asked questions

Can you match countertops across several homes in one subdivision in Katy?
Yes, by choosing the same material, color and edge profile for each house. Neighbors or a builder can settle the choice once and repeat it from house to house. Each house still gets its own template and install, since cabinet runs, appliances and sink positions differ even within one subdivision.
How do you measure a kitchen in a master-planned community like Katy?
With a digital template of the actual cabinets, taken once they are set and level. A builder may offer the same plan with different options, such as an island, a longer run or a wider range, so two houses on one street can need different tops. The template records what is really there, including any options added after the house was built.
Do homes in Katy get the full range of materials?
Yes. There is no smaller selection by location: granite, quartz, quartzite, marble and porcelain are all on the table, in the same edge profiles and thicknesses. What changes from one house to the next is the kitchen, not the list. The estimate is where the choices get narrowed down to the ones that suit your room and the way you cook.
Can you match a countertop we already have in Katy?
For quartz, a pattern that is still made can match exactly, since every slab of it looks alike. Natural stone never matches exactly, because each slab is different, but a slab of the same stone can come close, and a sample held next to the old top shows how close. Bring a loose piece of the old stone to the estimate if you have one.
Free in-home estimate
Digital template, in-house fabrication
Our own install crews
Greater Houston, 70 miles around

Get a free estimate

Get a Free Estimate