Between downtown and the outer ring, in Harris County, a kitchen in Nassau Bay may have a short tile splash from an earlier update, and taking it down leaves a strip of wall to finish.
Choosing between the stones
The first choice is natural or engineered. Granite, quartzite and marble are cut from the earth, so every slab is different and you pick the actual slab we cut. Quartz and porcelain are made to a pattern, so a sample shows you what the whole slab looks like. After that, the choice comes down to heat, care and look.
Granite is the working stone. It takes normal pan heat and resists scratches, and it needs a penetrating sealer. Quartzite looks closer to marble and is harder than granite, with the same need for sealer. Quartz asks for no sealer at all and stays clean with soap and water, but it wants a trivet under a hot pot, and it never goes outside, because sunlight yellows its resin.
Marble etches from acids and scratches more easily than the others, and it needs resealing over the years. People who choose it for a kitchen choose the patina too. Porcelain is thin, often 12 mm, and it resists heat, sun and stains. Its printed face can stop at the edge, so a mitered edge is the common fix, and it needs a solid, level base underneath.
From estimate to install
You will see us three times. The first visit is the free estimate. We measure enough to price the job, check the cabinets for level, look at the sink and the cooktop and bring samples, so you can see each stone in your own light. The written price lists the stone, the edges, the cutouts, tear-out and the sink install line by line.
The second visit is the template. It happens once the cabinets are set and level. Our templater records the room digitally, which catches walls that are out of square, and settles the seam placement and the overhangs with you. Nothing is cut before that. In our shop, the slab is then cut to the template, with the sink and cooktop openings cut and the edges polished.
The third visit is the install. The crew removes the old tops and takes them away, sets the stone on the cabinets, fills the seams with epoxy tinted to the stone and sets the sink. Faucet holes are drilled on site at install, where the faucet will sit. Natural stone gets sealer, and the crew cleans up before it leaves.
Older houses and older cabinets
In an older house, the cabinets under the old top may no longer be level, and the walls may not be square. We check every run with a level before the template, and the digital template records the walls as they are, so the stone is cut to the room and not to a drawing. A cabinet that needs shimming or a repair should be fixed before template day, since fixing it first saves a recut.
Countertop repair
Not every worn top has to come out. We fill chips at edges and sink rims, rework seams that have opened, re-polish dull spots and re-seal stone whose sealer has worn thin. A loose undermount sink can be re-attached. Some damage cannot be made to disappear, and a chip in porcelain is hard to repair. The quickest way to begin is to describe the damage in the estimate form.
Before template day
A few decisions make template day go smoothly. The cabinets should be set, fastened and level. The sink model should be chosen and the cooktop or range model known, since their openings are cut in our shop from the template. Pick the faucet too, because it sets how many faucet holes the top needs. Decide on the overhang for any seating and on the backsplash height. Clear the counters and the sink base so the templater can reach every wall, and plan for someone to be home. A change after the template can mean a second template, so the layout is settled on the spot.
Where we work and how to start
Towns and neighborhoods near Nassau Bay that we serve include Clear Lake, Webster and League City.
If you are planning new countertops in Nassau Bay, send the estimate form or give us a call. We bring the samples, and you bring the questions.