In the Austin area, in Travis County, a newer house in Lakeway may have an island big enough that its top comes from two slabs.
Choosing between the stones
The first choice is natural or engineered. Granite, quartzite and marble are cut from the earth, so every slab is different and you pick the actual slab we cut. Quartz and porcelain are made to a pattern, so a sample shows you what the whole slab looks like. After that, the choice comes down to heat, care and look.
Granite is the working stone. It takes normal pan heat and resists scratches, and it needs a penetrating sealer. Quartzite looks closer to marble and is harder than granite, with the same need for sealer. Quartz asks for no sealer at all and stays clean with soap and water, but it wants a trivet under a hot pot, and it never goes outside, because sunlight yellows its resin.
Marble etches from acids and scratches more easily than the others, and it needs resealing over the years. People who choose it for a kitchen choose the patina too. Porcelain is thin, often 12 mm, and it resists heat, sun and stains. Its printed face can stop at the edge, so a mitered edge is the common fix, and it needs a solid, level base underneath.
Vanities, fireplaces and backsplash
Stone goes well beyond the kitchen. Vanity tops can run in 2 cm stone, and when the sizes work, a small vanity can come out of the kitchen slab. A fireplace surround can match the kitchen or contrast with it, and marble is a classic there, since a surround sees little wear. Backsplash can stop a few inches above the counter or run full height to the upper cabinets, and a full-height splash cut from the counter slab carries the pattern up the wall. Each of these starts with the same free estimate as a kitchen.
How a job runs
Every job runs through the same steps with the same crew. It starts with a free estimate at the house. We look at the cabinets, the sink and the cooktop, bring samples of all five materials and give you a written price, with tear-out and the sink install as their own lines. Then you choose the stone. Granite, quartzite and marble are picked slab by slab at any stone yard in Houston or the Austin area: you send us a photo of the slab tag, and the slab is confirmed at template. Quartz and porcelain are picked from samples.
Once the cabinets are set and level, our templater comes back and records every wall, run and cutout with a digital template. Someone should be home for that visit, since seams and overhangs get settled on the spot. In our shop, we cut the slab to that template, polish the edges and cut the sink and cooktop openings.
On install day, the crew takes out the old tops and hauls them away, sets the new stone, fills the seams with color-matched epoxy, sets the sink and drills the faucet holes. Granite, quartzite and marble get their sealer before the crew leaves.
The scheduled trip
Every Austin-area visit rides the same scheduled trip from our Houston shop. Samples come to the estimate, and between trips the slab is cut to the template in that shop, so the install trip brings the finished tops, the epoxy and the sealer in one run.
Tear-out and haul-away
If old tops are coming off, that happens at the start of the install visit, right before the new stone goes in, and an early tear-out is available on request. The sink and the faucet are disconnected first. The crew then lifts off the old laminate, tile or stone, protects the cabinets and the floor as it works, and hauls the old material away on our truck. Tear-out is its own line on the estimate, so you can see what it costs.
Where we work and how to start
Close to Lakeway, we also work in Bee Cave, Dripping Springs and Cedar Park.
For a free in-home estimate in Lakeway, fill in the form below or call. A few photos of the counters help us come prepared.