Within Williamson County, a house on a sloped lot in Leander can put steps between the drive and the door.
Choosing between the stones
The first choice is natural or engineered. Granite, quartzite and marble are cut from the earth, so every slab is different and you pick the actual slab we cut. Quartz and porcelain are made to a pattern, so a sample shows you what the whole slab looks like. After that, the choice comes down to heat, care and look.
Granite is the working stone. It takes normal pan heat and resists scratches, and it needs a penetrating sealer. Quartzite looks closer to marble and is harder than granite, with the same need for sealer. Quartz asks for no sealer at all and stays clean with soap and water, but it wants a trivet under a hot pot, and it never goes outside, because sunlight yellows its resin.
Marble etches from acids and scratches more easily than the others, and it needs resealing over the years. People who choose it for a kitchen choose the patina too. Porcelain is thin, often 12 mm, and it resists heat, sun and stains. Its printed face can stop at the edge, so a mitered edge is the common fix, and it needs a solid, level base underneath.
From estimate to install
You will see us three times. The first visit is the free estimate. We measure enough to price the job, check the cabinets for level, look at the sink and the cooktop and bring samples, so you can see each stone in your own light. The written price lists the stone, the edges, the cutouts, tear-out and the sink install line by line.
The second visit is the template. It happens once the cabinets are set and level. Our templater records the room digitally, which catches walls that are out of square, and settles the seam placement and the overhangs with you. Nothing is cut before that. In our shop, the slab is then cut to the template, with the sink and cooktop openings cut and the edges polished.
The third visit is the install. The crew removes the old tops and takes them away, sets the stone on the cabinets, fills the seams with epoxy tinted to the stone and sets the sink. Faucet holes are drilled on site at install, where the faucet will sit. Natural stone gets sealer, and the crew cleans up before it leaves.
The scheduled trip
Every Austin-area visit rides the same scheduled trip from our Houston shop. Samples come to the estimate, and between trips the slab is cut to the template in that shop, so the install trip brings the finished tops, the epoxy and the sealer in one run.
Countertop repair
Not every worn top has to come out. We fill chips at edges and sink rims, rework seams that have opened, re-polish dull spots and re-seal stone whose sealer has worn thin. A loose undermount sink can be re-attached. Some damage cannot be made to disappear, and a chip in porcelain is hard to repair. The quickest way to begin is to describe the damage in the estimate form.
Builders, remodelers and commercial work
We also work for builders, remodelers, designers and property managers. Builders and remodelers give us the cabinet date, and we template once the boxes are set, then schedule the install around the other trades. Designers can send drawings with the estimate request, and we check them against the real walls at template. Restaurants, bars, offices and hotels get commercial counters cut in the same shop and set by the same crew. Apartment owners doing unit turns can repeat one material and one edge profile across every unit.
Where we work and how to start
Beyond Leander, our crew works across the rest of the Austin area, including Cedar Park, Georgetown and Round Rock.
If you are planning new countertops in Leander, send the estimate form or give us a call. We bring the samples, and you bring the questions.